Jacks Magic
-
Jacks Magic Jacks Magic Filter Fiber Stuff (D.E. Replacement) 22 Pounds - JMFIBER22
The Jacks Magic Filter Fiber Stuff combines high performance, outstanding value, and environmentally friendly features into one great product. When used as a safe alternative to DE in DE filters, The Filter Fiber Stuff requires less than half the amount of product (by weight) than needed when using DE. It can be used to enhance the filtering performance of sand and cartridge filters as well. Packaged in pre-measured bags with re-sealable zip lock packaging makes it easier to apply the correct dosage amount and easier storage. The Filter Fiber Stuff is non-toxic, making it safe to handle and store. It can also be backwashed safely as it is biodegradable. The Filter Fiber Stuff extends filter runs (Please Note: The first few filter runs may actually be shorter, due to the filtration of much finer particles), reduces filter clogging, and results in sparkling clear water of the highest quality. The Filter Fiber Stuff is also WQA (Water Quality Association) certified and has met the requirements of NSF/ANSI-50 for swimming pools and spas/hot tubs. Features: Biodegradable and non-toxic. Safe to handle and store. Reduces filter clogging. Safer than D.E. (diatomaceous earth) Compatible with sand and cartridge filters as well. Requires less than half the amount used with D.E. by weight. Environmentally friendly and safe to backwash. Directions for use with D.E. (Diatomaceous Earth) filters: Dosage: Add 1 D.E. Scoop of the Filter Fiber Stuff per 12 square feet of filter area. For example: 60 square feet requires 5 D.E. Scoops or 36 Ounces of Filter Fiber Stuff. Charging: Start with a clean filter. Note the filter operating pressure before the Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. Slowly add the solution through the skimmer with the pool pump in operation. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with the Filter Fiber Stuff. Directions for use with cartridge filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff per 25 square feet of filter area. Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add the solution into the skimmer. This may cause a 1-3 pound (PSI) rise in the filter pressure. Leave the Filter Fiber Stuff on the cartridge and operate the pool as normal. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds (PSI) above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with Filter Fiber Stuff. Directions for use with Sand Filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff at a time, with a maximum addition of 9 ounces (by weight). Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add 3 ounces (by weight) slurry into the skimmer, unto the skimmer until you see a 2-PSI increase on the pressure gauge, or until a maximum or 9 ounces (by weight) has been added. Cleaning: Backwash the Filter Fiber Stuff from the filter when the pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. The Filter Fiber Stuff must be back washed from the filter after a maximum 24 hours of operation time. It is important to clean the filter as needed and recharge it when necessary with the Filter Fiber Stuff for optimal clarity.
$115.60
-
Jacks Magic Jacks Magic Magenta Stuff 32 ounce - JMMAGENTA032
The Magenta Stuff by Jack's Magic (also known as JMMAGENTA032, JCK-50-818, 14773) protects pool finishes from common stains and scale. Used in salt chlorine generators and other pool sanitizer systems. It could be used to clean any existing stain or any future stains. Features: Removes stains and scales in swimming pools now and in the future Helps remove metallic stains on pool surfaces and equipment On the start-up of new pools controls plaster dust Prevents scale build-up and cleans salt chlorine generator cells Contains Phos-Stop Plus so it will not yield phosphates Works with all pool finishes and sanitizing systems 32 Ounce Bottle for 15,000 gallons
$27.78
-
Jacks Magic Jacks Magic Filter Fiber Stuff (D.E. Replacement) 9 Ounces - JMFIBER9
The Jack Magic Filter Fiber Stuff combines high performance, outstanding value, and environmentally friendly features into one great product. When used as a safe alternative to DE in DE filters, The Filter Fiber Stuff requires less than half the amount of product (by weight) than needed when using DE. It can be used to enhance the filtering performance of sand and cartridge filters as well. Packaged in pre-measured bags with re-sealable zip lock packaging makes it easier to apply the correct dosage amount and easier storage. The Filter Fiber Stuff is non-toxic, making it safe to handle and store. It can also be backwashed safely as it is biodegradable. The Filter Fiber Stuff extends filter runs (Please Note: The first few filter runs may actually be shorter, due to the filtration of much finer particles), reduces filter clogging, and results in sparkling clear water of the highest quality. The Filter Fiber Stuff is also WQA (Water Quality Association) certified and has met the requirements of NSF/ANSI-50 for swimming pools and spas/hot tubs. Features: Biodegradable and non-toxic. Safe to handle and store. Reduces filter clogging. Safer than D.E. (diatomaceous earth) Compatible with sand and cartridge filters as well. Requires less than half the amount used with D.E. by weight. Environmentally friendly and safe to backwash. Directions for use with D.E. (Diatomaceous Earth) filters: Dosage: Add 1 D.E. Scoop of the Filter Fiber Stuff per 12 square feet of filter area. For example: 60 square feet requires 5 D.E. Scoops or 36 Ounces of Filter Fiber Stuff. Charging: Start with a clean filter. Note the filter operating pressure before the Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. Slowly add the solution through the skimmer with the pool pump in operation. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with the Filter Fiber Stuff. Directions for use with cartridge filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff per 25 square feet of filter area. Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add the solution into the skimmer. This may cause a 1-3 pound (PSI) rise in the filter pressure. Leave the Filter Fiber Stuff on the cartridge and operate the pool as normal. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds (PSI) above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with Filter Fiber Stuff. Directions for use with Sand Filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff at a time, with a maximum addition of 9 ounces (by weight). Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add 3 ounces (by weight) slurry into the skimmer, unto the skimmer until you see a 2-PSI increase on the pressure gauge, or until a maximum or 9 ounces (by weight) has been added. Cleaning: Backwash the Filter Fiber Stuff from the filter when the pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. The Filter Fiber Stuff must be backwashed from the filter after a maximum 24 hours of operation time. It is important to clean the filter as needed and recharge it when necessary with the Filter Fiber Stuff for optimal clarity.
$6.34
-
Pool Supply Delivery Jacks Magic Purifiber - 25 lbs
The Jacks Magic Purifiber - 25 lbs is a completely safe to handle, high performance product that offers superior water clarity and longer filtering cycles while using less material than any other filter media on the market today, saving you time and money - an outstanding value for your pool. Application Pools Features: 25 lb. package Safe to handle Offers superior water clarity Longer filtering cycles Saves time and money
$54.40
-
Pool Supply Delivery Jacks Magic The Yellow Stuff All-Purpose Algaecide - 2 lbs
The Jacks Magic The Yellow Stuff All-Purpose Algaecide - 2 lbs (ALGAECIDE) is a powerful all-purpose algaecide. The Yellow Stuff quickly eliminates all types of algae breakouts, and is also a highly effective algae preventative. The Yellow Stuff is safe for all pool finishes and works all major pool sanitizing systems. Swimming can resume in a few hours. Application Pools Features: 2 lbs. All purpose solution Eliminates all types of algae breakouts Prevents algae Safe for all pool finishes Works with all sanitizing systems Swimming can resume within hours
$27.20
-
Pool Supply Delivery Jacks Magic The Blue Stuff - 6 quarts
Jacks Magic The Blue Stuff is very similar to The Pink Stuff, but is designed to be specifically superior to any other product at removing copper from the water. The Blue Stuff is the broadest spectrum product in the Jack’s Magic stain prevention lineup. While it is a misconception that it is “stronger” than The Pink Stuff, it does do a wider variety of things. The Blue Stuff is our most popular new pool start-up product because it is very effective and preventing plaster dust during the curing process. The Blue Stuff should be used when you know you have copper in your water (except when you are using an ionization system or mineral-based water conditioning system - for that please see The Ionizer Stuff), when there is a heater on the pool (which can sometimes put copper into the water). The Blue Stuff is also a good choice when you don’t have a clue what is in the water! The exception to this would be if you are using a salt chlorine generating system (you know who you are!), in which case you should use The Purple Stuff to prevent staining. Application In-ground Swimming Pools Features: The #1 recommended start-up product for quartz aggregate finishes! Aids in the prevention of metal stains & scale in new pools, and will help remove stains and scale in older pools. Initial dose: 32oz per 10,000 gallons Maintenance: 10-12ppm of jacks or 6-8oz per week per 10,000 gallons.
$86.40
-
Jacks Magic Jacks Magic The 60 Stuff Algaecide - 32 oz
The Jacks Magic The 60 Stuff Algaecide - 32 oz (ALGAECIDE) is a non-staining, non-foaming algaecide that kills all types of algae. The 60 Stuff is particularly effective at penetrating crevices where tough-to-remove black algae can thrive. The 60 Stuff treats stubborn algae growths in chlorine, bromine, salt, ionizer, and ozone systems, and is for all pool types. The 60 Stuff works well in pools with attached spas or water features, and will not affect pH levels. Application Pools Features: 32 oz. bottle Non-staining, non-foaming Kills all types of algae Penetrates crevices Works with chlorine, bromine, salt, ionizer, and ozone systems Works with attached spas and water features Won't affect pH levels
$23.20
-
Jacks Magic Jacks Magic Stain Identification Kit
Jacks Magic Topical Stain Identification Kit. Okay, if you’ve wandered around the site and found that we keep harping on you about using a Stain ID Kit, kudos to you for coming here to learn more about it. We cannot stress the importance of this product enough when you are dealing with existing staining. Ready to learn more about it? Read on... Many stains look alike but are not the same and will not react the same to stain removal chemicals. It is important to remember this... what worked for your neighbor’s brown stain may not work for yours. That’s where the Stain ID Kit comes in... it removes all the guesswork so what you’re left with is a stain removal “system” that actually works - not a bunch of individual products that simply don’t. The Jacks Magic Stain ID Kit is basically a “sample” kit... All you do is try the products directly in a stained area (steps & swimouts work best) and see which product or combination of products works best to remove your stains. There is no need to drain water out of the pool... there’s no need to climb in... the products are heavier than water and will sink to the floor when the pool water is still. When you get the right product (or combination of products), your stain will magically disappear in the test area. Once you’ve determined what you need, you can safely order full sized products to treat the entire pool and relax knowing you’ve finally found something that actually works! Application For use in determining which is the best of 4 different Jacks Magic product to remove a swimming pool stain Features: The first step in the Jack's Magic stain removal program. This Kit includes 4 different tests which is the best for removing a swimming pool stain, saving both time and money
$15.20
-
Pool Supply Delivery Jacks Magic The Purple Stuff 1qt
Jacks Magic The Purple Stuff is a one-of-a-kind stain preventative for use specifically with salt chlorine generating systems. Unlike traditional sequestering agents, The Purple Stuff works extremely well in high salt and high TDS pools. The Purple Stuff keeps silica in solution while greatly reducing the incidence of scaling in salt chlorine generators. Application In-ground Swimming Pools - Equipped with a Salt Chlorine Generator Features: Aids in the prevention of metal stains & scale in new pools, and will help remove stains and scale in older pools. Initial dose: 32oz per 10,000 gallons Maintenance: 10-12ppm of jacks or 6-8oz per week per 10,000 gallons.
$25.60
-
Pool Supply Delivery Jacks Magic The Ionizer Stuff Ion Solution - 32 oz
The Jack’s Magic Ion Solution is also known as the Ion Solution. The Ion Solution is formulated to prevent copper staining with any copper sanitizing system, regardless of whether it's electronic or catalytic. The Ionizer Stuff will help you keep your pool water soft and crystal clear. Please note: This product is not available for sale to our customers located in California. AquaSupercenter will not monitor this and if a purchase is completed it will be shipped as usual. Application: Used with Copper / Silver Ionizers Features: Safe on all pool finishes Prevents copper staining Works with electronic and catalytic systems Safe to swim after 15 minutes of circulation Dosing: 16 oz per 10,000 gallons monthly Large 32 oz size
$25.60
-
Pool Supply Delivery Jacks Magic The Purple Stuff – 6 quarts
Jacks Magic The Purple Stuff is a one-of-a-kind stain preventative for use specifically with salt chlorine generating systems. Traditional sequestering agents simply can’t handle the demand that high salt and high TDS (total dissolved solids) put on them. Most products are not effective in these situations, but The Purple Stuff was designed for it! In addition to preventing swimming pool staining, The Purple Stuff also helps keep the chlorine generator’s cells from developing scale, which makes maintenance significantly easier. Like The Pink Stuff and The Blue Stuff, the Sequest Test Kit is actually designed to measure the current level of The Purple Stuff in the water. This helps to ensure you have enough product in the water to prevent staining from occurring. If you don’t add enough product, the pool is not protected and stains can develop even though you thought you were preventing them. Application In-ground Swimming Pools - Equipped with a Salt Chlorine Generator Features: For all salt-water pools. Aids in the prevention of metal stains & scale in new pools, and will help remove stains and scale in older pools. Initial dose: 32oz per 10,000 gallons Maintenance: 10-12ppm of jacks or 6-8oz per week per 10,000 gallons.
$136.00
-
Pool Supply Delivery Jacks Magic The Blue Stuff 1qt
Jacks Magic The Blue Stuff is the most recommended start up product in the industry for plaster pools. It is very similar to The Pink Stuff, but is designed to be specifically superior to any other product at removing copper from the water. The Blue Stuff is the broadest spectrum product in the Jack’s Magic stain prevention lineup. While it is a misconception that it is “stronger” than The Pink Stuff, it does do a wider variety of things. The Blue Stuff is one of the most popular new pool start-up product because it is very effective and preventing plaster dust during the curing process. The Blue Stuff should be used when you know you have copper in your water (except when you are using an ionization system or mineral-based water conditioning system - for that please see The Ionizer Stuff), when there is a heater on the pool (which can sometimes put copper into the water). The Blue Stuff is also a good choice when you don’t have a clue what is in the water! The exception to this would be if you are using a salt chlorine generating system, in which case you should use The Purple Stuff to prevent staining. Application For use in In-ground Swimming Pools Prevents and removes stains and scale in plaster, vinyl, and fiberglass pools Features: The #1 recommended start-up product for quartz aggregate finishes! Aids in the prevention of metal stains & scale in new pools, and will help remove stains and scale in older pools Initial dose: 32oz per 10,000 gallons Maintenance: 10-12ppm of jacks or 6-8oz per week per 10,000 gallons Very stable in high chlorine levels Very efficient at controlling plaster dust
$14.40
-
Pool Supply Delivery Jacks Magic Tile Cleaner
The Jacks Magic Tile Cleaner has been specially developed to keep pool tile, grout, vinyl liners, and fiberglass looking their stain-free best. Its fast-acting, multi-acid formulation starts working on contact, providing immediate visible cleaning action. The Tile Plus Stuff has gel-like properties that adhere to the surface of tile, grout, vinyl liners, and fiberglass for maximum cleaning of scale, metal stains (including rust), oils, and cosmetics. This product will not etch tile or grout when used as directed, and is compatible with all pool sanitizer systems. Application Pools Features: Keeps pool tile, grout, vinyl liners and fiberglass stain-free Fast-acting Multi-acid formulation works on contact Gel-like properties adhere to surfaces Cleans scale, metal stains, rust, oils, and cosmetics Won't etch tile or grout Compatible with pool sanitizer systems
$19.20
-
Pool Supply Delivery Jacks Magic The Emerald Stuff Water Clarifier - 32 oz
The Jacks Magic The Emerald Stuff Water Clarifier - 32 oz - (FOUR-BY-ONE CLARIFIER) produces super clear water fast through a highly effective “4 x 1” action: the rich green emerald formulation combines a powerful clarifier, sequestrate, chelating agent, and flocculent in one convenient product. The Emerald Stuff requires no premixing, will not affect pH, and is compatible with all swimming pool sanitizer systems. The Emerald Stuff removes oils, soaps, metals, cosmetics, and other particulate matter that can cause staining, cloudy water, and discoloration. The Emerald Stuff also increases filter efficiency. Application Pools Features: 32 oz. bottle Produces clear water Clarifier, sequestrate, chelating agent, flocculent in one No premixing required Won't affect pH Compatible with all pool sanitizer systems Removes oils, soaps, metals, and cosmetics Increases filter efficiency
$9.60
-
Pool Supply Delivery Jacks Magic O2 Safe Shock Non-Chlorine - 5 lbs
The Jacks Magic O2 Safe Shock Non-Chlorine - 5 lbs (NON-CHLORINE SHOCK) is a non-chlorine shock (but not a persulfate compound). O2 Safe Shock yields more than 12% active oxygen (3 times more oxygen than persulfate compounds). O2 Safe Shock can be used as an acid wash pretreatment, making tough copper stains much easier to remove. Please Note: Not recommended for chlorinated pools, but ideal for biguanide, ozone, and ionization systems. Application: Pools Features: 5 lbs. Non-chlorine shock Yields more than 12% active oxygen Use as an acid wash pretreatment Makes copper stains easier to remove Not for chlorinated pools Use with biguanide, ozone, ionization systems
$55.20
-
Pool Supply Delivery Jacks Magic Filter Fiber Stuff (D.E. Replacement) 36 Ounces - JMFIBER36
Jacks Magic Filter Fiber Stuff (D.E. Replacement) 36 Ounces - JMFIBER36 combines high performance, outstanding value, and environmentally friendly features into one great product. When used as a safe alternative to DE in DE filters, The Filter Fiber Stuff requires less than half the amount of product (by weight) than needed when using DE. It can be used to enhance the filtering performance of sand and cartridge filters as well. Packaged in pre-measured bags with re-sealable zip-lock packaging makes it easier to apply the correct dosage amount and easier storage. The Filter Fiber Stuff is non-toxic, making it safe to handle and store. It can also be backwashed safely as it is biodegradable. The Filter Fiber Stuff extends filter runs (Please Note: The first few filter runs may actually be shorter, due to the filtration of much finer particles), reduces filter clogging, and results in sparkling clear water of the highest quality. The Filter Fiber Stuff is also WQA (Water Quality Association) certified and has met the requirements of NSF/ANSI-50 for swimming pools and spas/hot tubs. Features: Biodegradable and non-toxic. Safe to handle and store. Reduces filter clogging. Safer than D.E. (diatomaceous earth) Compatible with sand and cartridge filters as well. Requires less than half the amount used with D.E. by weight. Environmentally friendly and safe to backwash. Directions for use with D.E. (Diatomaceous Earth) filters: Dosage: Add 1 D.E. Scoop of the Filter Fiber Stuff per 12 square feet of filter area. For example, 60 square feet require 5 D.E. Scoops or 36 Ounces of Filter Fiber Stuff. Charging: Start with a clean filter. Note the filter operating pressure before the Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. Slowly add the solution through the skimmer with the pool pump in operation. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with the Filter Fiber Stuff. Directions for use with cartridge filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff per 25 square feet of filter area. Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add the solution into the skimmer. This may cause a 1-3 pound (PSI) rise in the filter pressure. Leave the Filter Fiber Stuff on the cartridge and operate the pool as normal. Cleaning: The filter should be cleaned when the filter pressure rises 10 pounds (PSI) above the clean filter operating pressure, or when the flow back into the pool is diminished. It is important to clean the filter as needed and recharge it each time with Filter Fiber Stuff. Directions for use with Sand Filters: Dosage: Add 3 ounces (by weight) of The Filter Fiber Stuff at a time, with a maximum addition of 9 ounces (by weight). Charging: Start with a clean filter. Note the filter operating pressure before The Filter Fiber Stuff is added; this will be your clean filter operating pressure. Next, create a slurry. With the pool pump in operation, slowly add 3 ounces (by weight) slurry into the skimmer, unto the skimmer until you see a 2-PSI increase on the pressure gauge, or until a maximum of 9 ounces (by weight) has been added. Cleaning: Backwash the Filter Fiber Stuff from the filter when the pressure rises 10 pounds above the clean filter operating pressure, or when the flow back into the pool is diminished. The Filter Fiber Stuff must be backwashed from the filter after a maximum of 24 hours of operation time. It is important to clean the filter as needed and recharge it when necessary with the Filter Fiber Stuff for optimal clarity.
$17.60
-
Pool Supply Delivery Jacks Magic Clean Water Solution - 32 oz
The Jacks Magic Clean Water Solution - 32 oz is the strongest, most durable natural enzyme available. The Natural Clean Stuff keeps working even in higher chlorine levels. With The Natural Clean Stuff, you use about half as much to get twice the results. The Natural Clean Stuff will cut down on tile cleaning and extend filter runs. The Natural Clean Stuff is a must for commercial pools and pools with heavy bather loads or airborne contaminant loading. Application: Pools Features: 32 oz. bottle Works in higher chlorine levels Cuts down on tile cleaning Extends filter runs
$8.00
-
Pool Supply Delivery Jacks Magic All Fixed Up Weekly Maintenance - 32 oz
The Jacks Magic All Fixed Up Weekly Maintenance - 32 oz (WEEKLY MAINTENANCE) The All Fixed Up Stuff is a weekly maintenance product that contains an extra strength clarifier that makes pool water sparkling clear. Application Pools Features: 32 oz. bottle Weekly maintenance Extra strength clarifier keeps water clear
$17.60
-
Pool Supply Delivery Jacks Magic After Shock Chlorine Reducer - 16 oz
The Jacks Magic After Shock Chlorine Reducer - 16 oz (CHLORINE REDUCER) quickly reduces chlorine levels. Application Pools Features: 16 oz bottle Reduces chlorine levels
$16.80
-
Jacks Magic Jacks Magic Stain Solution Number 1 - 2 lbs
The Jacks Magic Stain Solution #1 - 2 lbs; Item # JMPJMIRON2 Application Pools Features: 2 lbs. Item # JMPJMIRON2
$389.60
-
Jacks Magic Jacks Magic Stain Solution Number 1 - 1 lb
The Jacks Magic Stain Solution #1 - 1 lb; Item # JMPJMIRON1 Application Pools Features: 1 lb. Item # JMPJMIRON1
$22.40
-
Jacks Magic Jacks Magic Surface Magic - 2 oz
The Jacks Magic Surface Magic - 2 oz; Item # JMPJMSURFACE02 Application: Pools Features: 2 oz. Item # JMPJMSURFACE02
$53.60
-
Pool Supply Delivery Jacks Magic The Pink Stuff 1qt
Jacks Magic The Pink Stuff - 1 Quart Jack’s Magic Metal Solution, better known as The Pink Stuff, is a professional strength, general purpose sequestering agent. The Pink Stuff will help prevent metal and mineral stains and scale in new pools as a preventative; it will also aid in the removal of stains and scale in older pools. The Pink Stuff can be used to remove any metal but it is more aggressive with iron stains and scale. For copper stains and scale The Blue Stuff is recommended. Dosing: Initial Dose is 1 Qt per 10,000 Gallons followed by 6-8 oz per 10,000 weekly for maintenance. You should allow 15 minutes of circulation after using The Pink Stuff before swimming. Application: Swimming Pools Features: 1 Qt Bottle Initial Dose is 1 Qt per 10,000 Gallons 6-8 oz per 10,000 weekly for maintenance Used as preventative or treatment Used to remove any metal More aggressive on iron staining and scale Manufacturer Part Number: JMPINK032
$13.60
-
Pool Supply Delivery Jacks Magic The Pink Stuff – 6 quarts
Jacks Magic The Pink Stuff is the “original” Jack’s Magic stain prevention product. While it’s older than the others, it still is stronger and more effective than the competitors. The Pink Stuff can be used under “normal” circumstances and is a great all-around sequestering agent. It works by grabbing and removing metallic contaminants through the pool’s filtration system. While The Pink Stuff will work on a variety of things, it is most effective on iron and is generally used with Stain Solution #1 in stain removal treatments. If you fill your pool with well water and don’t have a high TDS, The Pink Stuff is for you. The Pink Stuff can also be used if you don’t have a pool heater and know that copper is not a problem for you. Unlike most stain preventatives, The Pink Stuff is chlorine tolerant under normal conditions. Most products require you to lower the chlorine level in order for the product to be effective... not with ours. Also, Jack’s Magic is the only company that actually has a test kit designed to measure the amount of its sequestering agents so you can determine exactly how much to add to maintain appropriate levels. Application In-ground Swimming Pools - Equipped with a Salt Chlorine Generator Features: "The Pink Stuff" is not recommended as a stain removal product by itself. Aids in the prevention of metal stains & scale in new pools, and will help remove stains and scale in older pools. Initial dose: 32oz per 10,000 gallons Maintenance: 10-12ppm of jacks or 6-8oz per week per 10,000 gallons.
$84.80
You have seen 24 out of 31 products