SR Smith
-
SR Smith S.R. Smith MultiLift Pool Lift - 575-0000
S.R. Smith MultiLift Pool Lift - 575-0000 is a flanged pool lift that is a snap to install! The Wheel-A-Way™ option provides flexibility to remove the lift for seasonal storage. Right or left side mounting means less to think about when selecting a pool lift location on the deck. The multi lift comes standard with our LiftOperator® Intelligent Control System. Specifications: the multi lift is verified to be ADA-compliant. 350-pound lifting capacity.
$4,479.99
-
SR Smith S.R. Smith Fiberglass RGB LED Light - FLED-C-FG-150
The S.R. Smith Fiberglass RGB LED Light FLED-C-FG-150 has no end-shadow effect which is common in most other pool lighting systems. This design is specific for illuminating your entire pool by having a wide beam spread, and providing even light distribution.There are a couple different options provided for setting the right mood. First, the 'six color lock' which allows you to pick your favorite color for the moment and keep it locked on that color. The next option is to chose one of the two color change modes, where the lights demonstrate a basic light show. Another beneficial feature is the ability to synchronize this lighting system with your Color Light Streams systems, allowing for an incredible visual experience.These lights are 5 Watts with a safe 12 Volt power supply that maintain a 50,000 hour lamp life. Features: Underwater Fiberglass RGB LED Light for Fiberglass Pools and Spas 6 Color Array Color Lock and Color Unison 2 Color Change Modes No End-Shadow Effect Even Light Distribution Wide Beam Spread Synchronize with Color Light Streams No Earth-Bonding Required Non-Leak Water Seal Protection Memory Function Flexible Lens Adapts to Extreme Temperatures Color Control and Dimming Control Specifications: Volts: 12 Watts: 5 Low Voltage Cord: 150' Lamp Life: 50,000 Hours Fiberglass Pool Lights can be Powered by the following S.R. Smith Power Centers: PT-6000 WIRTRAN WPC1-XXXX-T WPC2-XXXX-T iStar Note: Encapsulated cable terminations eliminate external cable and water seal heat caused deterioration.
$271.99
-
SR Smith S.R. Smith Flyte-Deck II Stand with 8' Fibre Diving Board - 68-210-73810
S.R. Smith Flyte-Deck II Stand with 8.0 Feet Fibre Diving Board 68-210-73810 includes a Flyte-Deck II Stand, an 8 ft. Fibre Diving Board and stainless steel hardware. This best selling combination offers heavy duty durability, while also providing a sleek, stylish design. Constructed using a scratch resistant acrylic reinforced with fiberglass, the Flyte-Deck II Stand will resist damage from saltwater, rust, or fading. The medium flex, acrylic coated Fibre Diving Board is built for safety, featuring a reinforced fulcrum and matching, non-slip sanded tread. It also comes with an instructional video to encourage safe diving. Features: Diving Board Length: 8 ft Color: Taupe Designed for in-ground, residential pools Durable, sturdy construction Scratch resistant Features a sleek design Resists weathering, rusting & fading Diving Board features matching, non-slip sanded tread Includes corrosion resistant, stainless steel hardware Pre-drilled holes allow for easy installation A rebar jig is included for concrete deck installation
$1,287.99
-
SR Smith S.R. Smith Easy-Out Therapeutic 3-Step Ladder - TL-3B
The S.R. Smith Easy-Out Therapeutic 3-Step Ladder TL-3B is a long reach ladder designed to assist those involved in aquatic therapy who find it difficult to use traditional pool ladders. This durable stainless steel ladder features 3 stainless steel steps, and is rated to be used in commercial or residential pools. It also includes rubber bumpers on the lower ends that protect the pool floor. Features: Durable, long reach ladder Ideal for use with aquatic therapy Includes 3 stainless steel treads (LTDF-105) Two rubber bumpers on the lower ends protect the pool floor Includes two anchor sockets 20” centers Recommended Anchor: AS-100B (sold separately) Recommended Escutcheon: EP-100A (sold separately) Specifications: Made of 304 stainless steel 1.90" OD Tubing .065" Wall Thickness 6" Radius Bends
$1,407.99
-
SR Smith S.R. Smith Flyte-Deck II Stand with 6' Fibre Diving Board - 68-210-73620
S.R. Smith Flyte-Deck II Stand with 6.0 Feet Fibre Diving Board 68-210-73620 includes a Flyte-Deck II Stand, a 6 ft. Fibre Diving Board and stainless steel hardware. This best selling combination offers heavy duty durability, while also providing a sleek, stylish design. Constructed using a scratch resistant acrylic reinforced with fiberglass, the Flyte-Deck II Stand will resist damage from salt water, rust, or fading. The medium flex, acrylic coated Fibre Diving Board is built for safety, featuring a reinforced fulcrum and matching, non-slip sanded tread. It also comes with an instructional video to encourage safe diving. Features: Diving Board Length: 6 ft Color: Pewter Gray Designed for in-ground, residential pools Durable, sturdy construction Scratch resistant Features a sleek design Resists weathering, rusting & fading Diving Board features matching, non-slip sanded tread Includes corrosion resistant, stainless steel hardware Pre-drilled holes allow for easy installation A rebar jig is included for concrete deck installation
$975.99
-
SR Smith S.R. Smith Frontier II 6' Diving Board Taupe Matching Thread - 66-209-586S10T
The S.R. Smith Frontier II 6 Ft Diving Board 66-209-586S10T is intended for light to moderate use and is great for residential pools. Features hand-laid fiberglass and resin roving over a solid laminated wood runner acting as the board's skeletal frame. Pre-drilled holes for easy installation, stainless steel hardware, matching slip resistant sand tread for maximum safety. Application: In-Ground swimming pools Features: Taupe with Matching Tread 6 Ft Weight Limit: 250 Lbs Fiberglass reinforced core Pre-Drilled Holes. For Residential use Non-Slip, Sanded Tread Intended for light to moderate use
$647.99
-
SR Smith S.R. Smith Access Lift Battery Charger - 1001530
The S.R. Smith Access Lift Battery Charger 1001530 is designed to work with S.R. Smith Swimming Pool Lifts using the Lift-Operator Intelligent Control system. Used for regular charges of S.R. Smith swimming pool lift batteries. This charger is for lifts manufactured 2012 and beyond or have been updated with the Lift-Operator Control Box. Features: 24 volt lift battery charger Standard battery charger for SR Smith lifts manufactured 2012 and beyond meets DoE Level VI efficiency requirements.
$111.99
-
SR Smith S.R. Smith Fiberglass White LED Light - FLED-W-FG
The S.R. Smith Fiberglass White LED Light FLED-W-FG has no end-shadow effect which is common in most other pool lighting systems. This design is specific for illuminating your entire pool by having a wide beam spread, and providing even light distribution.This light is perfect for setting the right mood in your pool. A beneficial feature is the ability to synchronize this lighting system with your Color Light Streams systems.These lights are 5 Watts with a safe 12 Volt power supply that maintains a 50,000 hour lamp life. Features: Underwater Fiberglass White LED Light for Fiberglass Pools and Spas Best Light for Fiberglass Pools No End-Shadow Effect Even Light Distribution Wide Beam Spread Synchronize with Color Light Streams No Earth-Bonding Required Non-Leak Water Seal Protection Memory Function Flexible Lens Adapts to Extreme Temperatures Dimming Control Specifications: Volts: 12 Watts: 5 Low Voltage Cord: 80' Lamp Life: 50,000 Hours Fiberglass Pool Lights can be Powered by the following S.R. Smith Power Centers: PT-6000 WIRTRAN WPC1-XXXX-T WPC2-XXXX-T iStar Note: Encapsulated cable terminations eliminate external cable and water seal heat caused deterioration.
$255.99
-
SR Smith S.R. Smith Flyte-Deck II Stand with 6' Fibre Diving Board - 68-210-73610
S.R. Smith Flyte-Deck II Stand with 6.0 Feet Fibre Diving Board 68-210-73610 includes a Flyte-Deck II Stand, a 6 ft. Fibre Diving Board and stainless steel hardware. This best selling combination offers heavy-duty durability, while also providing a sleek, stylish design. Constructed using a scratch resistant acrylic reinforced with fiberglass, the Flyte-Deck II Stand will resist damage from saltwater, rust, or fading. The medium flex, acrylic coated Fibre Diving Board is built for safety, featuring a reinforced fulcrum and matching, non-slip sanded tread. It also comes with an instructional video to encourage safe diving. Features: Diving Board Length: 6 ft Color: Taupe Designed for in-ground, residential pools Durable, sturdy construction Scratch resistant Features a sleek design Resists weathering, rusting & fading Diving Board features matching, non-slip sanded tread Includes corrosion resistant, stainless steel hardware Pre-drilled holes allow for easy installation A rebar jig is included for concrete deck installation
$975.99
-
SR Smith S.R. Smith 6' ADA Extended 2 Bend Stair Rail - 2HR-6ADA
S.R. Smith 6 Feet ADA Extended 2 Bend Stair Rail - 2HR-6ADA is a standard height stair rail that meets all ADA safety requirements. This stainless steel stair rail is designed to be used on stairs or slopes in commercial pools and spas made of concrete, shotcrete, vinyl, or fiberglass. The ADA Extended 2-Bend Stair Rail may be installed using an optional AS-100B anchor, or by anchoring with reinforced rods. Features: 1.90" OD tubing .065" wall thickness ADA compliant Made of 304 stainless steel Corrosion-resistant Not recommended for use in salt pools Recommended optional anchor: AS-100B (sold separately) Recommended optional escutcheon: EP-100F (sold separately) Dimensions: Height above the finished surface: 34" Length: 6' Bends: 6" radius
$639.99
-
SR Smith S.R. Smith 6' Frontier III Diving Board and Salt Pool Jump Stand - 68-211-59610
S.R. Smith 6.0 Feet Frontier III Diving Board and Salt Pool Jump Stand 68-211-59610 is specially designed to be used in pools with high salt content, and includes a Frontier III diving board, spring set, salt pool jump stand, and stainless steel hardware. This corrosion resistant board and stand set is ideal for pools that use salt chlorination systems, and offers long lasting performance in even the harshest environments. The Frontier III Diving Board is built for safety, featuring a high grade, slip resistant tread. It also comes with an instructional video to encourage safe diving. Features: Diving Board Size: 6 ft Color: Taupe Designed for use in salt pools Durable and corrosion resistant Includes a low profile, fiberglass-backed stand Composite spring assembly for long lasting performance Ideal for use with salt chlorination systems Features a high grade, slip resistant tread Withstands harsh environments Includes stainless steel hardware Maybe retrofitted onto current 606/608 Cantilever jigs
$1,639.99
-
SR Smith S.R. Smith 3 Bend 5' Handrail w/ extension - 3HR-5-049-1-VW
S.R. Smith 3 Bend 5 feet Handrail with extension - 3HR-5-049-1-VW is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Radiant White Length: 5 ft with 1 ft extension 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$639.99
-
SR Smith S.R. Smith 4' 3 Bend Handrail - 3HR-4-049-VW
S.R. Smith 4 feet 3 Bend Handrail - 3HR-4-049-VW is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Radiant White Length: 4 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$639.99
-
SR Smith S.R. Smith 3 Bend 5' Handrail w/ extension - 3HR-5-049-1-VT
S.R. Smith 3 Bend 5 feet Handrail w/ extension - 3HR-5-049-1-VT is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Taupe Length: 5 ft with 1 ft extension 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$639.99
-
SR Smith S.R. Smith 3 Bend 4' Handrail w/ extension 3HR-4-049-1-VG
S.R. Smith 3 Bend 4 feet Handrail with extension 3HR-4-049-1-VG is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl and includes extensions. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Pewter Gray Length: 4 ft w/ 1 ft extension 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$639.99
-
SR Smith S.R. Smith 3 Bend 4' Handrail - 3HR-4-049-VT
S.R. Smith 3 Bend 4 feet Handrail - 3HR-4-049-VT is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Taupe Length: 4 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$559.99
-
SR Smith S.R. Smith 3 Bend 6' Handrail - 3HR-6-049-VT
S.R. Smith 3 Bend 6' feet Handrail - 3HR-6-049-VT is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Taupe Length: 6 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$559.99
-
SR Smith S.R. Smith 4' 2-Bend Handrail - 2HR-4-065
The S.R. Smith 4 feet 2-Bend Handrail 2HR-4-065 is a stable safety rail that is suitable for concrete, shotcrete, fiberglass, and vinyl pools. It is at standard height and runs parallel to the slope of the stair set. These rails are made with stainless steel, polished type 304. When the handrail is properly anchored it can be used for pools, spas, inclined slopes and stair-sets. The bends on this handrail are at a nominal 6" in radius. For installment you will drill below deck level and anchor the rail with reinforced rods. Features: Handrail for Commercial Pools (Residential Optional) Suitable for Concrete, Shotcrete, Fiberglass, and Vinyl Pools Runs Parallel to Slope of Stair-set Polished Type 304 Stainless Steel Works with pools, spas, slopes and stair-sets Recommended Anchor: IAS-100 (Order Separately) Recommended Escutcheon: IEP-100 (Order Separately) Specifications: Length: 4' Bottom to Top Rail Height: 58" Bottom Step to Top Step Height: 26" Extended Front Leg Extra Length: No Bends: 2 Bend Radius: 6" Tubing: 1.90" OD Commercial Rail Thickness: 0.065"
$535.99
-
SR Smith S.R. Smith 3 Bend 4' Handrail w/ extension - 3HR-4-049-1-VT
S.R. Smith 3 Bend 4 feet Handrail with extension - 3HR-4-049-1-VT is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl and includes extensions. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Taupe Length: 4 ft w/ 1 ft extension 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$639.99
-
SR Smith S.R. Smith 3 Bend 5' Handrail - 3HR-5-049-VG
S.R. Smith 3 Bend 5 feet Handrail - 3HR-5-049-VG is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Pewter Gray Length: 5 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$559.99
-
SR Smith S.R. Smith 3 Bend 4' Handrail - 3HR-4-049-VG
S.R. Smith 3 Bend 4 feet Handrail - 3HR-4-049-VG is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Pewter Gray Length: 4 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$559.99
-
SR Smith S.R. Smith 4' ADA Extended 3 Bend Stair Rail - 3HR-4ADA
S.R. Smith 4 Feet ADA Extended 3 Bend Stair Rail - 3HR-4ADA is a standard height stair rail that meets all ADA safety requirements. This stainless steel stair rail is designed to be used on stairs or slopes in commercial pools and spas made of concrete, shotcrete, vinyl, or fiberglass. The ADA Extended 3-Bend Stair Rail may be installed using an optional AS-100B anchor, or by anchoring with reinforced rods. Features: 1.90" OD tubing .065" wall thickness ADA compliant Made of 304 stainless steel Corrosion-resistant Not recommended for use in salt pools Recommended optional anchor: AS-100B (sold separately) Recommended optional escutcheon: EP-100F (sold separately) Dimensions: Height above the finished surface: 34" Length: 4' Bends: 6" radius
$639.99
-
SR Smith S.R. Smith 3 Bend 5' Handrail - 3HR-5-049-VT
S.R. Smith 3 Bend 5 feet Handrail - 3HR-5-049-VT is a durable handrail made of high-quality stainless steel that has been covered in StressLess Vinyl. This protective coating is applied to eliminate corrosion and ensure that the rails stay cool to the touch even in extremely hot temperatures. It also makes the Sealed Steel 3-Bend Handrail ideal for use in salt pools and other harsh pool environments. The rails feature WetTraction technology along the length of the rail that increases the traction when wet, preventing the rails from becoming slippery. Sealed Steel 3-Bend Handrails also includes a rubber sealing cap on the end of the rails that completely seals off the inside of the rail from the outside environment. The Sealed Steel 3-Bend Handrail may not be used in heated pools or spas that have a water temperature greater than 100 degrees F. Features: Color: Taupe Length: 5 ft 1.90" OD tubing Bends have a 6” radius Includes escutcheons Features StressLess Vinyl protective coating Effectively eliminates corrosion Stays cool to the touch in hot temperatures Ideal for use in salt pools and other harsh pool environments WetTraction technology prevents the rails from becoming slippery Includes a rubber sealing cap May not be used in pools or spas with water temperatures greater than 100° F
$559.99
-
SR Smith S.R. Smith 29" Standard Plus 4 Step Ladder .109" Wall - 10020
S.R. Smith 29 inches Standard Plus 4 Step Ladder .109 inch Wall 10020 are made from thick high quality stainless steel tubing making it corrosion resistant and are suitable for heavy duty use in commercial aquatic facilities. This commercial grade pool ladder has durable plastic steps for swimmers to get in and out of your pool. S.R. Smith Pool Ladders are meticulously crafted for performance, durability and beauty. Features: Made of corrosion resistant T304 stainless steel Polished and buffed finish Width is front to back All bends are 4 inch radius to provide a closer fit between pool wall and ladder Cycolac plastic 20 inch vertical steps Fitted with two white rubber bumpers on bottom ends to protect pool wall Anchor sockets and escutcheons are not included and must be ordered separately Specifications: Tube Thickness: 1.9 Inches Tube Diameter: .109 Inch Steps: 4 Steps
$1,175.99
You have seen 312 out of 799 products