Chlorinator Parts
-
AutoPilot Autopilot Replacement Salt Cell w/ Unions RC-42 (SC-48) - PPC3
Autopilot Replacement Salt Cell w/ Unions RC-42 (SC-48) - PPC3 will extend the lifespan of your AutoPilot chlorine generator. All salt cells need to be replaced periodically. By swapping your worn out cell with this replacement part, you'll be ready to treat up a 42,000 gallon pool. Integrated unions make replacement simple. Be sure to replace the cell cord at the same time to ensure warranty coverage. The Autopilot RC-42 replacement cell is compatible with all Pool Pilot Total Control, Digital, Soft Touch saltwater chlorine generators. For pools up to 42,000 gallons. Salt Cell Only Features: Contains 13 titanium blades inside of the cell Treats pools up to 50,000 gallons Designed to be installed in the AutoPilot bypass manifold Union connections are pre-installed from the factory. Can be used with Pool Pilot Digital, 75003 or Soft Touch. Formerly known as both parts SC-48 and RC-42
$843.88
-
AutoPilot Autopilot Replacement Salt Cell with Unions RC-52 - PPC4
Autopilot Replacement Salt Cell with Unions RC-52 PPC4 will extend the lifespan of your AutoPilot chlorine generator. All salt cells need to be replaced periodically. By swapping your worn out cell with this replacement part, you'll be ready to treat up a 52,000 gallon pool. Integrated unions make replacement simple. Be sure to replace the cell cord at the same time to ensure warranty coverage. This cell with unions is designed to be installed in the patented Autopilot bypass manifold. Cell with unions only, manifold not included. Features: Contains 13 titanium blades inside of the cell Treats pools up to 52,000 gallons Designed to be installed in the AutoPilot bypass manifold Union connections are pre-installed from the factory. Unit includes the cell with unions; the manifold is not included Formerly known as both parts SC-60 and RC52
$1,166.07
-
Pentair Pentiar IntelliChlor Salt System Power Center Only - EC-520556
This is the Pentair IntelliChlor Salt System Power Center Only - EC-520556. IntelliChlor takes electrolytic chlorine generation to a higher level of convenience, reliability and safety. Electrolytic Chlorine Generation is the easiest, most effective and convenient way to keep pool water sparkling clean. The IntelliChlor chlorine generator uses common table salt to produce all the chlorine your pool needs, right in your pool – safely, effectively, and automatically. Same sanitation performance as manual chlorine addition without the drawbacks. No need to buy, transport and store expensive chlorine compounds. No more odor, stinging eyes, irritated skin and bleached out swimsuits. Application: In-ground Pools Features: Cell blades are rated for more than 10,000 hours of operation – five years of reliable chlorine output under normal operating conditions Full diagnostic capabilities, including cell life tracking that communicates remaining hours of cell life in real-time. Captures all performance data daily (production settings, hours of operation, chlorine output, cell cleaning cycles, salt readings, and water temperature averages) making it easy to maintain perfect water Push-button operation and easy-to-view displays enable fast checking of salt levels, cell cleanliness, sanitizer output, and water flow Automatic shut-off feature protects the unit and prolongs cell life under low water temperature conditions Union inlet and outlet connections make cell replacement fast and easy On-time cycling prevents calcium and scale build-up to maximize cell life Ability to communicate with IntelliTouch Automation Systems Certified to UL 1081 standard for safety
$753.35
-
Hayward Hayward Drain Plug With Gasket
Hayward Drain Plug With Gasket Hayward Drain Plug With Gasket is a replacement part for Hayward Pumps Series: SUPER II, Super, Max-Flo, Power-Flo LX and Power-Flo II. Application Outdoor Features: Drain Plug With Gasket Replacement part for Hayward Pumps Series: SUPER II, Super, Max-Flo, Power-Flo LX and Power-Flo II
$6.44
-
Hayward Hayward Chlorinator Control Knob Assembly w-Viton O-Rings
Hayward Chlorinator Control Knob Assembly w/Viton O-Rings Hayward Chlorinator Control Knob Assembly w/Viton O-Rings is a replacement part for chlorine and bromine feeders. Application: Outdoor Features: Chlorinator Control Knob Assembly w/Viton O-Rings Chlorine and bromine feeders
$20.57
-
Hayward Hayward 1/4" Adapter Fitting For CL200 & CL 22 Series Chlorinator
Hayward 1/4" Adapter Fitting For CL200 & CL 22 Series Chlorinator Hayward 1/4" Adapter Fitting is replacement part for Chlorine Feeder of model CL200 and CL220. Application: Outdoor Features: Hayward 1/4" Adapter Fitting Replacement part for Chlorine Feeder of model CL200 and CL220
$2.95
-
Stenner Stenner Replacement Tube Kit - 2 Pack
Stenner Replacement Tube Kit - 2 Pack Stenner Replacement Tube Kit is 2 Pump Tube Replacement for Stenner Pumps. Application: Outdoor Features: Replacement Tube Kit 2 Pump Tube
$38.74
-
Hayward Hayward Chlorinator Lid for CL100 and CL110 Series Chlorine Feeders
Hayward Chlorinator Lid for CL100 and CL110 Series Chlorine Feeders is a replacement part for the Hayward CL100 and CL110 Series chlorine feeders.
$24.31
-
Blue White Blue White Anti-Siphon Injection Valve for 1/4
Blue White Anti-Siphon Injection Valve for 1/4 Blue White Anti-Siphon Injection Valve for 1/4 for 3/8" is the replacement part of Blue White Auto Feeders. Application Outdoor Features: Anti-Siphon Injection Valve for 1/4 Replacement part of Blue White Auto Feeders
$54.56
-
AquaCal Autopilot Tri-Sensor Assembly w- Cord
Autopilot Tri-Sensor Assembly w/ 12' Cord - MFG# APA0003 Application Replacement Tri-Sensor Assembly w/ 12' Cord for Autopilot Systems Features: Genuine Autopilot replacement part
$266.07
-
Hayward Hayward Chlorinator Cover Cap
Hayward Chlorinator Cover Cap - CLX200C is designed to use with Hayward chlorine and bromine chemical feeder models CL200, CL220, CL220BR. Specifications: Brand: Hayward Item Name: Hayward Feeder Cover Cap Type: Automation and Sanitization Parts For Use With: CL200, CL220 Chlorine Feeders
$29.54
-
Hayward Hayward Chlorinator Check Valve Assembly
Hayward Chlorinator Check Valve Assembly Hayward Chlorinator Check Valve Assembly is a replacement part for chlorine and bromine feeders. Application Outdoor Features: Chlorinator Check Valve Assembly Chlorine and bromine feeders
$16.85
-
Stenner Stenner Injection Check Valve 1/4"
Stenner Injection Check Valve 1/4" Stenner Injection Check Valve 1/4" is replacement part for Stenner Pumps Chemical Feeder. Application: Outdoor Features: Injection Check Valve Size: 1/4"
$19.34
-
Hayward Hayward CL100-CL110 Chlorinator Cover O-Ring
Hayward CL100/CL110 Chlorinator Cover O-Ring Hayward CL100/CL110 Chlorinator Cover O-Ring is replacement part for Cl100 and CL110 Series Chlorine Feeders. Application Outdoor Features: Chlorinator Cover O-Ring Replacement part for Cl100 and CL110 Series Chlorine Feeders
$30.19
-
Hayward Hayward Chlorinator Cover Viton O-Ring for CL200 - 220 Feeder
Hayward Chlorinator Cover Viton O-Ring for CL200 / 220 Feeder The Hayward Chlorinator Viton O-Ring is a replacement Lid/Cap O-ring used with the CL200 and CL220 Chlorinators. Never use a petroleum based lubricant on any of the chlorinator o-rings. Regular cover o-ring lubrication is necessary to maintain easy cover removal. Application: Hayward CL200 and CL220 Chlorinators Features: Genuine Hayward Chlorinator Part Used with CL200 and CL220 models Special Composition Viton O-Ring Measures Approximately 6” in Diameter
$34.03
-
Blue White Blue White FlexFlo A100N Metering Feeder Pump 115V - 3-8" OD 24 GPD Compression Nuts
Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 24 GPD Compression Nuts Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 24 GPD Compression Nuts has self priming. It includes standard solid state output adjustments. Its output pressures up to 100 PSI. Application Outdoor Features: Flexilo A100N Metering Feeder Pump Self priming Output pressures up to 100 PSI Color: White
$664.27
-
Blue White Blue White FlexFlo A100N Metering Feeder Pump 115V - 3-8" OD 3.1 GPD Compression Nuts
Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 3.1 GPD Compression Nuts Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 3.1 GPD Compression Nuts has self priming. It includes standard solid state output adjustments. Its output pressures up to 100 PSI. Application Outdoor Features: Flexilo A100N Metering Feeder Pump Self priming Output pressures up to 100 PSI Color: White
$664.27
-
Blue White Blue White FlexFlo A100N Metering Feeder Pump 115V - 3-8" OD 6.8 GPD Compression Nuts
Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 6.8 GPD Compression Nuts Blue White FlexFlo A100N Metering Feeder Pump 115V - 3/8" OD 6.8 GPD Compression Nuts has self priming. It includes standard solid state output adjustments. Its output pressures up to 100 PSI. Application Outdoor Features: Flexilo A100N Metering Feeder Pump Self priming Output pressures up to 100 PSI Color: White
$664.27
-
Blue White Blue White FlexFlo A100N Metering Feeder Pump 115V - 1/4" OD 52.5 GPD Compression Nuts
Blue White FlexFlo A100N Metering Feeder Pump 115V - 1/4" OD 52.5 GPD Compression Nuts Blue White FlexFlo A100N Metering Feeder Pump 115V - 1/4" OD 52.5 GPD Compression Nuts has self priming. It includes standard solid state output adjustments. Its output pressures up to 100 PSI. Application Outdoor Features: Flexilo A100N Metering Feeder Pump Self priming Output pressures up to 100 PSI Color: White
$664.27
-
AutoPilot Autopilot Replacement Salt Cell with Unions - PPC1 - (RC35/22)
Autopilot Replacement Salt Cell with Unions - PPC1 - (RC35/22) will extend the lifespan of your AutoPilot chlorine generator. All salt cells need to be replaced periodically. By swapping your worn out cell with this replacement part, you'll be ready to treat up a 35,000 gallon pool. Integrated unions make replacement simple. Be sure to replace the cell cord at the same time to ensure warranty coverage. Features: Treats pools up to 35,000 gallons when used with Digital, Soft Touch, or 75003 Total Control power supplies Treats pools up to 22,000 gallons when used with Digital Nano or AG power supplies Integrated unions Formerly known as part number RC35/22 Replaces the following cells: AP-150, RC-5, SC-36, RC-35/22.
$562.84
-
Autopilot Autopilot Replacement Salt Cell with Unions 32K Gallon - PPC2 - (RC28)
Autopilot Replacement Salt Cell with Unions 32K Gallon - PPC2 - (RC28) will extend the lifespan of your AutoPilot chlorine generator. All salt cells need to be replaced periodically. By swapping your worn out cell with this replacement part, you'll be ready to treat up a 35,000 gallon pool. Integrated unions make replacement simple. Be sure to replace the cell cord at the same time to ensure warranty coverage. Features: Treats pools up to 32,000 gallons when used with Digital, Soft Touch, or 75003 Total Control power supplies Treats pools up to 22,000 gallons when used with Digital Nano or AG power supplies Integrated unions Formerly known as part number RC35/22 Replaces the following cells: AP-150, RC-5, SC-36, RC-35/22.
$899.99 $789.88
-
Hayward Hayward Flush Union Connector 1.5" SKT - Set Of 2
Hayward Flush Union Connector 1.5" SKT - Set Of 2 Hayward Flush Union Connector 1.5" SKT - Set Of 2 is a replacement part for CL200 and CL220 series chlorine feeders. Application Outdoor Features: Flush Union Connector - Set Of 2 Replacement part for CL200 and CL220 series chlorine feeders Pipe Size: 1.5" SKT
$21.41
-
Hayward Hayward Cover Chlorine Feeders
Hayward Cover Chlorine Feeders Hayward Cover Chlorine Feeders is replacement part for CL200 and CL220 Series Chlorine Feeders. Application Outdoor Features: Cover Replacement part for CL200 and CL220 Series Chlorine Feeders
$24.58
-
AutoPilot AutoPilot Replacement Commercial Cell with Unions for a Single Cell Manifold - PPC5
AutoPilot Replacement Commercial Cell with Unions for a Single Cell Manifold PPC5 is designed for use with single cell manifolds only. All salt cells needs to be replaced periodically. By swapping your worn out cell with this replacement part, you will extend the lifespan of your AutoPilot chlorine generator. Integrated unions make replacement simple. Be sure to replace the cell cord at the same time to ensure warranty coverage. Features: Treats up to 80,000 Gallons For use with the Pool Pilot Digital, 75003 or Soft Touch Features unions on both ends Designed to be installed in the AutoPilot bypass manifold Union connections are pre-installed from the factory. Unit includes the cell with unions; the manifold is not included Formerly known as part number CC15-FF Inline Strainer protects the Tri-Sensor and the Cell from debris that may bypass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Includes Tri-Sensor, a three way sensing device which measures flow, salt level, and water temperature. The Chlorine Production Cell produces 100% pure sodium hypochlorite in your pool plumbing, returning it to your pool.The check valve in the manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to bypass the production cell maximizing the production of chlorine.
$1,969.00
You have seen 24 out of 83 products