AquaCal

The DIG-220 Auto Pilot Pool Pilot Digital Power Supply / Power Center is a replacement digital power supply / control panel for that Auto Pilot DIG-36, DIG-48 and DIG-60 salt systems. Works with all autopilot cells: SC-36, SC-48, and SC60. Tri-Sensor cord not included. The normal Autopilot DIG-220 Digital Control Panel will not come with a "Timer" which allows you to control when your pool equipment/pump turns on and off. The timer feature is often not needed or used, BUT - if you wanted timer functionality - please contact us! Please let us know you want the timer feature and give us your order number. Please note, we do typically stock a few of these but it may take an additional few days to ship as it's a custom item. Application: In-ground Swimming Pools Features: Digital control panel Power Supply for Pool Pilot Digital Chlorine Generating Systems Combine with your choice of 4 cells to suit your pools size for a complete system Must be used with a patented bypass manifolds 94105, 94107, 94113 or 94115C 220 Volt standard, can be converted to 110 Volt Easy to read Vacuum Fluorescent Display which has UV protection Microprocessor technology Temperature compensation for chlorine output 24 Hour and 72 Hour boost cycles Operates at salt levels between 2,000 and 35,000 ppm Operates based on pressure so it operates when the pool pump runs and automatically turns off power to the cell when the pool pump stops.

Read more less

Autopilot Pool Pilot Replacement Salt Chlorine Generator Cell SC-36 (up to 35,000 Gallons). Replacement Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Picture is of a SC-48 Cell. Features: Can be used with Pool Pilot(R) Nano+ only. For pools up to 32,000 gallons. Cell cords must be replaced when cell is replaced in order to prevent voiding product warranty.

Read more less

Features: Get the most out of your pool heating investment! High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models) Microprocessor controlled defrost cycle allows operation down to mid to low 40s ° Built-in drain pan for condensate management Impact resistant, rust and fade proof cabinet Quieter than conventional heat pumps NEW Smart Microprocessor Control with LCD Display Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings Digital control panel with 24 character full-text display provides easy-to-read menu options and unit status Ability to connect to most external controllers Hybrid functionality can initiate a gas heater when an extra boost of heat is needed Specifications: BTUs (water temp/ambient air/relative humidity): 80/80/80: 52,000 80/80/63: 50,000 80/50/63: 33,000 Coefficient of Performance (water temp/ambient air/relative humidity): 80/80/80: 6.0 80/80/63: 5.8 80/50/63: 4.0 Refrigerant: R410A Heat Exchanger: Tube in Tube Electrical: KW Input: 2.7 Voltage/Hz/Phase: 208-230/60/1 Minimum Circuit Ampacity: 22.6 Maximum Fuse Size: 30 * Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications. Water Flow: Minimum/Maximum (gpm): 20/45 * A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135. Physical: Weight (lbs): 180 Size (LxWxH): 34″ x 34″ x 28″ Shipping: Weight (lbs): 220 Size (LxWxH): 38″ x 36″ x 33″

Read more less

Autopilot Pool Pilot Soft Touch Salt Chlorine Generator Complete System w/ SC-60 Cell (up to 50,000 Gallons) This Auto Pilot Pool Pilot chlorine generator is one of the best values available today. Incorporating microprocessor technology and 'soft touch' push-button features with LED read-out, this in-Line unit is very 'user friendly'. The Pool Pilot Soft Touch gives you accurate salt-level readings, has multiple boost cycles and our patented temperature compensation that operates in water temperatures up to 104°. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: More purifier output than any other unit - up to 2lbs./day Utilizes patented bypass manifold for optimum chlorine production Patented temperature compensation 24 & 72 hour boost cycles Operates at any water temperature up to 104° Operates at all salt levels - 2,000-35,000 ppm Lifetime trade-in value on cell Front panel quick reference guide Soft reverse cell cleaning Push button Controls Cell Warranty: 5 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

Autopilot Pool Pilot Soft Touch Salt Chlorine Generator Complete System w/ SC-36 Cell (up to 20,000 Gallons) This Auto Pilot Pool Pilot chlorine generator is one of the best values available today. Incorporating microprocessor technology and 'soft touch' push-button features with LED read-out, this in-Line unit is very 'user friendly'. The Pool Pilot Soft Touch gives you accurate salt-level readings, has multiple boost cycles and our patented temperature compensation that operates in water temperatures up to 104°. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: More purifier output than any other unit - up to 2lbs./day Utilizes patented bypass manifold for optimum chlorine production Patented temperature compensation 24 & 72 hour boost cycles Operates at any water temperature up to 104° Operates at all salt levels - 2,000-35,000 ppm Lifetime trade-in value on cell Front panel quick reference guide Soft reverse cell cleaning Push button Controls Cell Warranty: 3 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

AutoPilot Pool Pilot Salt Chlorine Generator DIGITAL MODEL has been the technological leader in the chlorine generation process for swimming pools since 1976. There are over 200,000 satisfied AutoPilot owners worldwide. In fact over 90% of the swimming pools in Australia are sanitized with chlorine generators. AutoPilot sets the standard for dependability, features and performance....and has a unit to fit every need and budget. For 30 years, AutoPilot Systems has been producing the finest Salt Chlorine Generators (electrolytic chlorine generator systems) for your pool. We are your most reliable source for chlorine generators — the most sought after form of alternative pool sanitation available in today's marketplace. By adding a minimum saline level in your pool, the equivalent of one teaspoon per gallon of water, and our salt conversion cell, we can show you the way to trouble free pool maintenance and the most luxurious softest feeling water imaginable — everyday, the natural way. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: Patented temperature compensation - Pool Pilot automatically adjusts the output level based upon the seasonal changes in water temperatures. As the temperature increases, the output will increase up to 100% higher than the normal setting. As the temperature decreases, the output will decrease down to 1% output (at below 50F). This eliminates the need for constant manual adjustments to keep up with the temperature changes. Maximum Purifier output, up to 2 lbs per day - The highest output cell in a compact size in the market! Each cell produces up to 2 lbs/day in a compact, lightweight package. Easy to service, powerful for any size pool. Multiple boost cycles, 24 & 72 hours - Two automatic Boost modes override the output setting to provide maximum purifier production for 24 or 72 hours, then automatically returns to the normal setting. Used when the purifier level drops low such as after heavy rainfall, large pool parties or refilling the pool. Operates at any water temperature up to 104 degrees - The microprocessor based Control unit continues to produce purifier at peak efficiency based upon temperature to provide optimum cell life. Operates at any salt level between 2,500 - 35,000 ppm - Nearly undetectable low operating salt level is safe for all salt-sensitive diets yet can also handle salt levels of 35,000 ppm (seawater) - and still provide incredibly soft, silky pool water. Control systems compatible - Designed to interface with electronic and chemical automation controllers. Soft reverse cell cleaning - Gently ramps-up power at polarity reversal for less "stress" on the power circuit board and cell coatings to optimize system life. Push button controls - soft push buttons are durable and comfortable to operate and adjust whenever needed. Lifetime trade-in value on cell - Long lasting cells now come with a trade-in value when its time to replace the cell. Cell Warranty - 5 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

Autopilot Pool Pilot Replacement Salt Chlorine Generator Cell SC-48 (up to 42,000 Gallons) Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Picture is of a SC-48 Cell. Application In-ground Swimming Pools Features: Brand new Autopilot / Pool Pilot replacement cell direct from Autopilot. Please Note: When replacing the Autopilot salt cell, if you do not also replace the cell cord at the time of change, it could void the cell's warranty. Power Supply: Soft Touch / Digital Choice of Cell: SC-36, SC-48, SC-60 Mfg New Number: RC-35/22*, RC-42, RC-52 Maximum Pool Size: 35,000, 42,000, 52,000 gallons Warranty: 2 Year *For pools up to 22,000 gallons when used with the Digital Nano or AG Power Supplies

Read more less

AutoPilot Pool Pilot Salt Chlorine Generator DIGITAL MODEL has been the technological leader in the chlorine generation process for swimming pools since 1976. There are over 200,000 satisfied AutoPilot owners worldwide. In fact over 90% of the swimming pools in Australia are sanitized with chlorine generators. AutoPilot sets the standard for dependability, features and performance....and has a unit to fit every need and budget. For 30 years, AutoPilot Systems has been producing the finest Salt Chlorine Generators (electrolytic chlorine generator systems) for your pool. We are your most reliable source for chlorine generators — the most sought after form of alternative pool sanitation available in today's marketplace. By adding a minimum saline level in your pool, the equivalent of one teaspoon per gallon of water, and our salt conversion cell, we can show you the way to trouble free pool maintenance and the most luxurious softest feeling water imaginable — everyday, the natural way. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: Patented temperature compensation - Pool Pilot automatically adjusts the output level based upon the seasonal changes in water temperatures. As the temperature increases, the output will increase up to 100% higher than the normal setting. As the temperature decreases, the output will decrease down to 1% output (at below 50F). This eliminates the need for constant manual adjustments to keep up with the temperature changes. Maximum Purifier output, up to 2 lbs per day - The highest output cell in a compact size in the market! Each cell produces up to 2 lbs/day in a compact, lightweight package. Easy to service, powerful for any size pool. Multiple boost cycles, 24 & 72 hours - Two automatic Boost modes override the output setting to provide maximum purifier production for 24 or 72 hours, then automatically returns to the normal setting. Used when the purifier level drops low such as after heavy rainfall, large pool parties or refilling the pool. Operates at any water temperature up to 104 degrees - The microprocessor based Control unit continues to produce purifier at peak efficiency based upon temperature to provide optimum cell life. Operates at any salt level between 2,500 - 35,000 ppm - Nearly undetectable low operating salt level is safe for all salt-sensitive diets yet can also handle salt levels of 35,000 ppm (seawater) - and still provide incredibly soft, silky pool water. Control systems compatible - Designed to interface with electronic and chemical automation controllers. Soft reverse cell cleaning - Gently ramps-up power at polarity reversal for less "stress" on the power circuit board and cell coatings to optimize system life. Push button controls - soft push buttons are durable and comfortable to operate and adjust whenever needed. Lifetime trade-in value on cell - Long lasting cells now come with a trade-in value when its time to replace the cell. Cell Warranty - 3 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

Autopilot Pool Pilot Soft Touch Salt Chlorine Generator Complete System w/ SC-48 Cell (up to 40,000 Gallons) This Auto Pilot Pool Pilot chlorine generator is one of the best values available today. Incorporating microprocessor technology and 'soft touch' push-button features with LED read-out, this in-Line unit is very 'user friendly'. The Pool Pilot Soft Touch gives you accurate salt-level readings, has multiple boost cycles and our patented temperature compensation that operates in water temperatures up to 104°. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: More purifier output than any other unit - up to 2lbs./day Utilizes patented bypass manifold for optimum chlorine production Patented temperature compensation 24 & 72 hour boost cycles Operates at any water temperature up to 104° Operates at all salt levels - 2,000-35,000 ppm Lifetime trade-in value on cell Front panel quick reference guide Soft reverse cell cleaning Push button Controls Cell Warranty: 4 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

Autopilot Pool Pilot Replacement Salt Chlorine Generator Cell SC-60 (up to 52,000 Gallons) Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Picture is of a SC-48 Cell. Application In-ground Swimming Pools Features: Brand new Autopilot / Pool Pilot replacement cell direct from Autopilot. Please Note: When replacing the Autopilot salt cell, if you do not also replace the cell cord at the time of change, it could void the cell's warranty. Power Supply: Soft Touch / Digital Choice of Cell: SC-36 (Mfg New Number: RC-35/22*) - Maximum Pool Size: 35,000 gallons SC-48 (Mfg New Number: RC-42) - Maximum Pool Size: 42,000 gallons SC-60 (Mfg New Number: RC-52) - Maximum Pool Size: 52,000 gallons Warranty: 2 Year *For pools up to 22,000 gallons when used with the Digital Nano or AG Power Supplies

Read more less

AutoPilot Pool Pilot Salt Chlorine Generator DIGITAL MODEL has been the technological leader in the chlorine generation process for swimming pools since 1976. There are over 200,000 satisfied AutoPilot owners worldwide. In fact over 90% of the swimming pools in Australia are sanitized with chlorine generators. AutoPilot sets the standard for dependability, features and performance....and has a unit to fit every need and budget. For 30 years, AutoPilot Systems has been producing the finest Salt Chlorine Generators (electrolytic chlorine generator systems) for your pool. We are your most reliable source for chlorine generators — the most sought after form of alternative pool sanitation available in today's marketplace. By adding a minimum saline level in your pool, the equivalent of one teaspoon per gallon of water, and our salt conversion cell, we can show you the way to trouble free pool maintenance and the most luxurious softest feeling water imaginable — everyday, the natural way. AutoPilot's patented bypass manifold is a pre-assembled unit designed to control the flow rate delivered to our cell. The spring check valve in the manifold allows excess flow, over 20 gpm, to by-pass the cell. The water in turn flows at a controlled rate through the cell where it is super chlorinated. The in-line strainer on the inlet side of the manifold protects the tri-sensor and production cell from debris that might bypass the filter. The location of the strainer next to a connection union makes periodic cleaning easy. The design of our patented bypass manifold guarantees optimum chlorine production and simplifies the installation process of the AutoPilot® Purifying System. Manifold features include: Inline Strainer - The in-line Strainer protects the Tri-Sensor and the Cell from debris that may by-pass the filter and obstruct either component. The location of the strainer in the connecting union makes it easy to remove for periodic cleaning. Tri-Sensor - The Tri-Sensor is a three way sensing device which measures flow, salt level, and cold water temperature. Chlorine Production Cell - The cell produces 100% pure Sodium Hypochlorite in your pool plumbing returning it to your pool. Check Valve - The check valve in the Manifold allows all water flowing through the plumbing at a rate greater than 20 gallons per minute to by-pass the production cell to maximize the production of chlorine. Application In-ground Swimming Pools Features: Patented temperature compensation - Pool Pilot automatically adjusts the output level based upon the seasonal changes in water temperatures. As the temperature increases, the output will increase up to 100% higher than the normal setting. As the temperature decreases, the output will decrease down to 1% output (at below 50F). This eliminates the need for constant manual adjustments to keep up with the temperature changes. Maximum Purifier output, up to 2 lbs per day - The highest output cell in a compact size in the market! Each cell produces up to 2 lbs/day in a compact, lightweight package. Easy to service, powerful for any size pool. Multiple boost cycles, 24 & 72 hours - Two automatic Boost modes override the output setting to provide maximum purifier production for 24 or 72 hours, then automatically returns to the normal setting. Used when the purifier level drops low such as after heavy rainfall, large pool parties or refilling the pool. Operates at any water temperature up to 104 degrees - The microprocessor based Control unit continues to produce purifier at peak efficiency based upon temperature to provide optimum cell life. Operates at any salt level between 2,500 - 35,000 ppm - Nearly undetectable low operating salt level is safe for all salt-sensitive diets yet can also handle salt levels of 35,000 ppm (seawater) - and still provide incredibly soft, silky pool water. Control systems compatible - Designed to interface with electronic and chemical automation controllers. Soft reverse cell cleaning - Gently ramps-up power at polarity reversal for less "stress" on the power circuit board and cell coatings to optimize system life. Push button controls - soft push buttons are durable and comfortable to operate and adjust whenever needed. Lifetime trade-in value on cell - Long lasting cells now come with a trade-in value when its time to replace the cell. Cell Warranty - 4 Years Benefits of a Salt Chlorine Generator System: Never buy chlorine again Soft, Silky feeling water No more red eyes No more itchy skin No more green hair No more vacation worries No more faded swimwear Energy efficient Environmentally friendly Automatic cell cleaning

Read more less

Get the most out of your pool heating investment! Features: High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models) Microprocessor controlled defrost cycle allows operation down to mid to low 40s ° Built-in drain pan for condensate management Impact resistant, rust and fade proof cabinet Quieter than conventional heat pumps NEW Smart Microprocessor Control with LCD Display Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings Digital control panel with 24 character full-text display provides easy-to-read menu options and unit status Ability to connect to most external controllers Hybrid functionality can initiate a gas heater when an extra boost of heat is needed Specifications: BTUs: 80/80/80: 96,000 80/80/63: 90,000 80/50/63: 65,000 Coefficient of Performance: 80/80/80: 6.0 80/80/63: 5.8 80/50/63: 4.2 Refrigerant: R410A Heat Exchanger: ThermoLink® Electrical: KW Input: 4.7 Voltage/Hz/Phase: 208-230/60/1 Minimum Circuit Ampacity: 40.2 Maximum Fuse Size: 60 Note: Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications. Water Flow: Minimum/Maximum (gpm): 30/70 Note: A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135. Physical: Weight (lbs): 255 Size (LxWxH): 34″ x 34″ x 39″ Shipping: Weight (lbs): 305 Size (LxWxH): 38″ x 36″ x 43″

Read more less

Features: Get the most out of your pool heating investment! High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models) Microprocessor controlled defrost cycle allows operation down to mid to low 40s ° Built-in drain pan for condensate management Impact resistant, rust and fade proof cabinet Quieter than conventional heat pumps NEW Smart Microprocessor Control with LCD Display Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings Digital control panel with 24 character full-text display provides easy-to-read menu options and unit status Ability to connect to most external controllers Hybrid functionality can initiate a gas heater when an extra boost of heat is needed Specifications: BTUs (water temp/ambient air/relative humidity): 80/80/80: 74,000 80/80/63: 70,000 80/50/63: 49,000 Coefficient of Performance (water temp/ambient air/relative humidity): 80/80/80: 5.6 80/80/63: 5.4 80/50/63: 4.0 Refrigerant: R410A Heat Exchanger: Tube in Tube Electrical: KW Input: 3.9 Voltage/Hz/Phase: 208-230/60/1 Minimum Circuit Ampacity: 31.4 Maximum Fuse Size: 50 *Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications. Water Flow: Minimum/Maximum (gpm): 20/45 *A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135. Physical: Weight (lbs): 200 Size (LxWxH): 34″ x 34″ x 28″ Shipping: Weight (lbs): 240 Size (LxWxH): 38″ x 36″ x 33″

Read more less

Get the most out of your pool heating investment! Features: High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models) Microprocessor controlled defrost cycle allows operation down to mid to low 40s °F Built-in drain pan for condensate management Impact resistant, rust and fade proof cabinet Quieter than conventional heat pumps NEW Smart Microprocessor Control with LCD Display Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings Digital control panel with 24 character full-text display provides easy-to-read menu options and unit status Ability to connect to most external controllers Hybrid functionality can initiate a gas heater when an extra boost of heat is needed Specifications: BTUs at 80/80/80: 112,000 BTUs at 80/80/63: 106,000 BTUs at 80/50/63: 74,000 Coefficient of Performance at 80/80/80: 5.6 Coefficient of Performance at 80/80/63: 5.4 Coefficient of Performance at 80/50/63: 4.0 Refrigerant: R410A Heat Exchanger: ThermoLink® Electrical KW Input: 5.9 Voltage/Hz/Phase: 208-230/60/1 Minimum Circuit Ampacity: 38.2 Maximum Fuse Size: 60 Note: Over Temperature Alarm Kit available: part number STK0221 for single phase, STK0222 for three phase. Strongly recommended for all spa applications. Water Flow Minimum/Maximum (gpm): 30/70 Note: A Heater Bypass Kit is required when flow rates exceed the maximum: part number STK0135. Physical Weight: 259 lbs Physical Size (LxWxH): 34″ x 34″ x 39″ Shipping Weight: 309 lbs Shipping Size (LxWxH): 38″ x 36″ x 43″

Read more less

Get the most out of your pool heating investment! Features: High performance titanium heat exchanger (Patented ThermoLink® in the T90, T115 and T135 models) Microprocessor controlled defrost cycle allows operation down to mid to low 40s °F Built-in drain pan for condensate management Impact resistant, rust and fade proof cabinet Quieter than conventional heat pumps NEW Smart Microprocessor Control with LCD Display Flip-out, lockable control panel is protected against sun and weather and can be easily programmed to prevent others from tampering with settings Digital control panel with 24 character full-text display provides easy-to-read menu options and unit status Ability to connect to most external controllers Hybrid functionality can initiate a gas heater when an extra boost of heat is needed Specifications: Efficiency KW Output: 10.6 BTU Output: 36,000 Coefficient of Performance (water temp/ambient air/relative humidity): 6.2 KW Input: 1.7 Electrical Voltage/Hz/Phase: 220-240/50/1 Minimum Circuit Ampacity Maximum Fuse Size: 20 Minimum Circuit Ampacity: 12.2 Heat Exchanger: Tube in Tube Water flow Min./Max. water Flow (m³/h): 4.5/10.2 Min./Max. water Flow (gpm): 20/45gpm Physical Weight (kg): 82 Weight (lb): 180 Length x Width x Height (cm): 92 x 64 x 72 Length x Width x Height (in): 36″ x 25″ x 28″ Shipping Weight (kg): 100 Weight (lbs): 220 Length x Width x Height (cm): 97 x 66 x 84 Length x Width x Height (in): 38″ x 26″ x 33″

Read more less

Introducing the new look of the HeatWave SuperQuiet®, the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your money. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures. *Rated in accordance with ARI standard 1160. Features: The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics. Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps. Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate. Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool. Corrosion Proof Cabinet Louvered side panels protect evaporator coil while ensuring efficient air flow Rust and fade proof Impact resistant Built-in drain pan provides condensate management AquaTop Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow Microprocessor Controlled with Digital Display Flip-out control panel is out of sight, protected against sun and weather Lockable panel provides security from others changing the temperature Accurate and easy-to-read bright blue display On-board self diagnostics Microprocessor controlled defrost cycle ThermoLink® Titanium Heat Exchanger Patented counter-flow water management system Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps Impervious to chemical corrosion Durability without sacrificing performance Lifetime warranty

Read more less

Introducing the new look of the HeatWave SuperQuiet®, the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your money. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures. *Rated in accordance with ARI standard 1160. Features: The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics. Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps. Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate. Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool. Corrosion Proof Cabinet Louvered side panels protect evaporator coil while ensuring efficient air flow Rust and fade proof Impact resistant Built-in drain pan provides condensate management AquaTop Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow Microprocessor Controlled with Digital Display Flip-out control panel is out of sight, protected against sun and weather Lockable panel provides security from others changing the temperature Accurate and easy-to-read bright blue display On-board self diagnostics Microprocessor controlled defrost cycle ThermoLink® Titanium Heat Exchanger Patented counter-flow water management system Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps Impervious to chemical corrosion Durability without sacrificing performance Lifetime warranty IceBreaker® Technology: Heat & Cool Model Extends swimming season longer than any other heat pump on the market Continue to heat at freezing temperatures to minimize heat loss Cool your pool to a refreshing temperature Set to heat, cool or autotemp

Read more less

Introducing the new look of the HeatWave SuperQuiet®, the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your money. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures. *Rated in accordance with ARI standard 1160. Features: The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics. Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps. Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate. Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool. Corrosion Proof Cabinet Louvered side panels protect evaporator coil while ensuring efficient air flow Rust and fade proof Impact resistant Built-in drain pan provides condensate management AquaTop Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow Microprocessor Controlled with Digital Display Flip-out control panel is out of sight, protected against sun and weather Lockable panel provides security from others changing the temperature Accurate and easy-to-read bright blue display On-board self diagnostics Microprocessor controlled defrost cycle ThermoLink® Titanium Heat Exchanger Patented counter-flow water management system Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps Impervious to chemical corrosion Durability without sacrificing performance Lifetime warranty

Read more less

Introducing the new look of the HeatWave SuperQuiet®, the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your money. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures. *Rated in accordance with ARI standard 1160. Features: The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics. Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps. Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate. Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool. Corrosion Proof Cabinet Louvered side panels protect evaporator coil while ensuring efficient air flow Rust and fade proof Impact resistant Built-in drain pan provides condensate management AquaTop Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow Microprocessor Controlled with Digital Display Flip-out control panel is out of sight, protected against sun and weather Lockable panel provides security from others changing the temperature Accurate and easy-to-read bright blue display On-board self diagnostics Microprocessor controlled defrost cycle ThermoLink® Titanium Heat Exchanger Patented counter-flow water management system Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps Impervious to chemical corrosion Durability without sacrificing performance Lifetime warranty

Read more less

Introducing the new look of the HeatWave SuperQuiet®, the TOP selling and most sought after heat pump on the market. With a pure Titanium ThermoLink® Heat Exchanger at its core – the HeatWave SuperQuiet® Series offers you optimum return on your money. All of our HeatWave SuperQuiet® Heat Pumps are fully tested and certified by AHRI. Making the right choice just got a whole lot easier. Some of the HeatWave SuperQuiet® models are ICEBREAKERS®, which heat and cool the pool. The ICEBREAKER® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures. *Rated in accordance with ARI standard 1160. Features: The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics. Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps. Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate. Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool. Corrosion Proof Cabinet Louvered side panels protect evaporator coil while ensuring efficient air flow Rust and fade proof Impact resistant Built-in drain pan provides condensate management AquaTop Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow Microprocessor Controlled with Digital Display Flip-out control panel is out of sight, protected against sun and weather Lockable panel provides security from others changing the temperature Accurate and easy-to-read bright blue display On-board self diagnostics Microprocessor controlled defrost cycle ThermoLink® Titanium Heat Exchanger Patented counter-flow water management system Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps Impervious to chemical corrosion Durability without sacrificing performance Lifetime warranty IceBreaker® Technology: Heat & Cool Model Extends swimming season longer than any other heat pump on the market Continue to heat at freezing temperatures to minimize heat loss Cool your pool to a refreshing temperature Set to heat, cool or autotemp

Read more less